Progressive Basement Insulation Methods Provide Many Beneficial Results

New living spaces are created when homeowners insulate their cellars. An added advantage is the ability to bring down the price of energy consumption. If improvements are not made the cold air below the ground level and the warm air above mingle and result in condensation. Spore growth will ensue causing rotting of the wooden frames. This contaminated air will also eventually cause health problems. Homeowners can choose from a wide selection of basement insulation methods. Learning the best alternatives will provide dividends in the end.

It requires patience to visit the basement repeatedly and discover what the pros and cons are. Taking time to investigate the below ground situation will bring in dividends that will prove to be advantageous in the future. Older basements may not be very appealing to evaluate but if one chooses to do this when the weather is not too hot or cold, the process will be less uncomfortable.

Three types of basement insulation are on the market to choose from. The blanket type, the polyurethane spray type and the rigid foam type. Each one these is suitable for a specific kind of cellar. The homeowner needs to assess which one works best for their basement. Once that has been ascertained they then must decide of they want to contract out the work or do it themselves.

Experience has shown that when a basement is insulated it does not take very long to recuperate the investment. The energy savings are significant throughout the house.

If the walls are straight then the best system is the rigid foam with the highest RSI value. It also requires the least amount of space. The exterior walls will have two inches of foam attached to them and the floor will only require one inch. Each piece fits together closely and a special adhesive glue is used to attach the panels onto the surfaces. The seams between the panels must be taped and sprayed with foam. Nailing strips provide an alternative solution to the gluing system. Studs are attached to the foam and a moisture resistant 12.7 millimeters of drywall is added to the studs.

There are two ways to build the new wall. It can be built flush using 2×4 inch lumber or it can be extended from the original wall by two inches. This creates an additional ventilation space that reduces moisture.

Spray foam is the best solution for irregular walls. It is also recommended for walls with moisture issues. The product must be applied by a certified specialist. The foam must be distributed evenly and covered by a layer of fire-resistant material. The foam tends to expand so it must be sprayed in moderation.

Any windows in the walls need to be insulated with spray polyurethane foam around the frames. Water pipes should be wrapped in their own insulating material and moved away from the wall insulation. Insulating Basement methods apply to windows also. Most of the outdoor heat and cool air comes in through the windows. The windows should be replaced with insulated windows that will greatly cut down on energy costs.

The leader in green Basement Insulation Methods, gives you a energy-efficient way to finish and insulate basements.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.