Surveying Your Fall Arrest Anchors And Security Equipment

Fall arrest anchors provide support for those that work at dangerous heights. The requirements for equipment standards are provide by OSHA in the United States. Other countries have similar requirements that are based on their local laws. The equipment is easy to come by, but making sure it is in good working order takes some time with each day of work. Learning to properly inspect it prior to use can save your life by making sure everything is in good working order.

Every time the equipment is used it should be inspected. Trusting that it is always fine is not the best idea. In most cases, wear and tear happen gradually over time. If a worker does not verify that everything is as it should be, they can be seriously injured or killed due to equipment failure.

Harnesses can fray after a period of use. When inspecting this piece you need to look for frayed edges, broken fibers, and other signs of wear. The D-rings also need to be inspected for cracks or breaks. The buckles should not have frayed or broken stitching. Grommets should not be bent or loose. If there are holes that are not made by the manufacturer the harness is weakened. Any of these issues should be enough to get a new harness.

Snap hooks and lanyards must be in top condition. The rope for the lanyard should not be cut, frayed, or show excessive wear. Lanyards and snap hooks often receive a lot of abuse. These should be inspected carefully for cracks and wear. If you are using a shock-absorbing lanyard check for similar cracks. These should also be replaced if they are not in perfect working condition.

Testing self-retracting lifelines prior to use is easy to do. The lines should be pulled out several feet and allowed to slowly retract. If it does not retract properly, replace the device completely. These devices are not easily repaired and should be serviced by a manufacturer’s representative or at a service center.

Roof anchors are to hold people and window washing equipment. These must be installed properly to avoid injury. Since they are designed to hold the heaviest load, they need to be inspected each time they are used. If they do not seem to be installed properly it is important to have them checked prior to use. If these give way, the rest of the equipment will be useless.

Storing and cleaning the equipment properly will extend its life. Many crews have a habit of simply tossing harnesses in the back of a truck. If the equipment that is designed to save your life is mistreated, it can easily fail on you. Treat it well and it will treat you well.

The equipment used with fall arrest Roof Anchors needs to be properly maintained in order to work correctly. OSHA requires a 5000 pound limit because a fall can exert this much force on the equipment. Because lives are at stake, it is critical to inspect the equipment prior to use. Look for frayed edges, loose anchors, and other wear that could weaken the equipment.

With over thirty years of experience in seven countries you can trust the experts in Window Washing Equipment.