A Convenient Instruction To Ceiling Fan Installation Made Easy

Few objects are as affordable and uncomplicated for those traditional house owners than a ceiling fan installation. The installation of one of these can actually make a difference in the hot and cold temperature of your residence. It can also make it possible to reduce your cost on heating and cooling bills by using a small portion of power itself.

In all truthfulness this is often a reasonably easy job that almost anybody with some common hand tools can achieve. Make sure you take your time and utilize safe working practices. In addition, it rarely ever hurts to inquire of an associate or loved one for a little help with the job either.

The first thing to undertake should be to figure out which area the fan should go into. More or less without exception they should go to the center of the room swapping out the light fixture that would already be there. This will have a dual purpose of mutually simplifying your task in addition to supplying additional ventilation throughout the room.

Most fans will use as much or less power than the light fixtures they replace. However this does not mean you should not check to make sure. If there is not a fixture you will have to run a new circuit for it. You could decide to tap into an existing circuit to do this or run one with a new breaker from the house main fuse box.

Blade clearance is also an issue that needs to be addressed. Most fans will be 7 to 10 inches below the highest point of the roof. Use this figure when determining the proper height. You will want to try to keep 8 to 10 inches below ceiling for good airflow. If this is a problem, possibly look into a shallow mount for it.

Since this is basically a light summary I will simply discuss the most crucial points. Always browse the manufacturer’s directions. They are usually loaded with almost every likely problem and resolution. Shut down the electric power within the circuit off, and remove the former light fixture. Make sure that the junction box is going to be strong enough to carry the added weight and also vibrations from the unit installation. Put together the fan and secure it to the junction box. Now stand back to admire your own handy work

Make certain everything was done the right way in advance of turning the power on initially. If there is smoke or absolutely nothing occurs when it is first started, stop and troubleshoot until the dilemma is uncovered and fixed. And the very best part; informing your friends and family concerning the ceiling fan installation you just did.

Troubles installing that fan? Mr Switch can give you additional instructions on ceiling fan installation if you’re having problems with that annoying installation process.

Similar Posts

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.